125 Calle Industrial
Bernalillo NM 87004
info@murraydrilling.com
 
Murray Drilling Company, Inc.
 
Call us today
505-867-9500
 
Water Wells, Pumps, Service & Inspections
NM Well Driller License # WD-672 | NM Electrical Specialty Water Well Pump Installer License # 384924
 
 
 
 
 

Water System Design IN ALBUQUERQUE, NM & SURROUNDING AREAS

 
 
WATER SYSTEM DESIGN BASED ON NEED, NOT THE WALLET.

The biggest mistake in water system design is going the cheapest route. We wouldn't put in a furnace to heat 1/2 of our house or put on 1/2 of the roof, yet the water system seems to be the first place the customer will try and shave off the most money.

In reality, the water system is one of (if not the most) important aspects in your house. At Murray Drilling Company, we design your water system based on two major factors: NEED AND LOCATION.

NEEDS
There are many elements to consider when sizing the system:
 
  1. WELL DEPTH & PUMPING LEVEL
  2. SQUARE FOOTAGE
  3. DISTANCE & ELEVATION TO HOUSE
  4. CURRENT AND FUTURE OUTDOOR PLANS
  5. # OF BATHROOMS
 
6.# OF STORIES
7.# OF PEOPLE
8.LIVESTOCK
9.# OF HOMES & ALL OF THE ABOVE FOR EACH
 
 
Drilling Truck — Water Well Drilling & Pump Contractors in NM
 
WE'RE POSITIVE WE WON'T BE ABLE TO SCHEDULE YOUR JOB THE FASTEST AND WE WILL NOT BE THE CHEAPEST
BID YOU GET. WE ARE POSITIVE OF OUR GOAL TO PROVIDE YOU WITH A QUALITY SYSTEM AT A FAIR PRICE.
 
LOCATION
Well depths will vary greatly from one area to another. Because we live in such a dynamic landscape, depths can be quite different from block to block and in some cases lot to lot. Over 37 years of experience has given us a large database of information regarding well depths, static levels, well yields and formations. At MDC we spend a great deal of time researching the area before providing an estimated well depth. If you are in an area that can be difficult, this will be reflected on the estimate.

Sure, you can cut back on depth, install the smallest pumping equipment you can get away with and install cheap products, but in the long run, you really do get what you pay for. Not only will the system fail to meet your demands, premature equipment failures are almost guaranteed. The $1200 you save today may well cost three times that in replacement or upgrades in just a few years.

UNDER SIZING as well as OVER SIZING a system will cause the equipment to operate outside of the optimum performance curve, which in turn will cost more to operate and shorten the life of the equipment. Over sizing can also have undesirable effects on fragile formations. At MDC we give a great deal of thought to sizing each system based on the needs of the household.
 
 
“I have no qualms with the man who has a lower price. After all, he knows better than anyone the quality of his work”

Call us today for an appointment.